Industrial Automated Control systems

PROCESS CONTROL MULTIVARIABLE SYSTEM

The system mod. FLTP/EV has been developed to cover the following educational subjects
included in an intense theoretical-practical training program, as follows: • Study of the sensors
and relative signal conditioners circuits for the process variables: Flow, Level, Temperature and
Pressure. • Study of the closed ring process control techniques. Study of the different process
control ways: PID control with PLC, with Industrial PID controller, with PC data acquisition card
and with data logger.

The system mod. FLTP/EV allows the theoretical analysis and the experiments on the following
subjects: • Detection of the characteristic curve of the transducers and the signal conditioning
circuits for the temperature, flow, level and pressure sensors. • Detection of the time constants
of the processes. • Analysis of the closed ring automatic control for flow, level, temperature
and pressure: ON/OFF control mode and Proportional (P), Proportional Integral (PI),
Proportional Derivative (PD) and Proportional Integral Derivative (PID) control mode. • Analysis
of the variables curves through the PID algorithm in the PLC, in the industrial PID controller
(with auto tuning function) and acquisition/control card for PC with dedicated software
(supplied).

The laboratory is also equipped with smart
Automated system which consists of:
1- PLC PANEL2,
2- TRAINING BOARD
3- FREQUENCY CONVRETER BOARD GL20
4- SIMATIC ENERY SUITE SOFTWARE With
Complete PC WORKSTATION

Autonomous robotics laboratory
The laboratory includes a complete Setup of Autonomous Robotic Systems:
5- Robot Arm Production Cell
6- Formula All Code Standard Kit
7- Formula All Code football mat add-on Maze Walls
8- Maze Mat for Formula All Code and
9- Two PC for programming, operation and GUI monitoring of the control units and the
robotic system.

Energy management simulation Software

LabVIEW System Design Software

National Instruments LabVIEW is a powerful development environment for signal acquisition,
measurement analysis, and data presentation, giving you the flexibility of a programming
language without the complexity of traditional development tools.
Typically, measurement and automation applications can be broken up into three primary
pieces – acquiring data, analyzing it, and then presenting it to the enterprise. LabVIEW,
designed specifically for scientists and engineers, has built-in tools to rapidly design these
applications.

8 AI (16-Bit, 100 kS/s), 2 AO (5 kS/s/ch), 13 DIO USB Multifunction I/O Device

The USB-6003 is a low-cost, multifunction DAQ device. It offers analog I/O, digital I/O, and a 32-bit counter. The USB-6003 provides basic functionality for applications such as simple data logging, portable measurements, and academic lab experiments. The device features a lightweight mechanical enclosure and is bus powered for easy portability. You can easily connect sensors and signals to the USB-6003 with screw-terminal connectivity. The included NI-DAQmx driver and configuration utility simplify
configuration and measurements.

 - NI Academic LabVIEW Teaching Lab Suite (10 User), Include 1 Year SSP*
 - USB-6003 16-Bit 100 kS/s Multifunction I/O and NI-DAQmx. QTY (10).
    - NI Starter Accessory Kit. QTY (10)

DesignBuilder Dynamic Simulation Model

DesignBuilder software provides a state-of-the-art graphical user interface to Level 3, 4 and 5
UK compliance engines for non-domestic energy assessment. DesignBuilder’s Dynamic
Simulation Model (DSM) interface uses EnergyPlus as the simulation engine and works
seamlessly with our SBEM interface. Whilst SBEM can only be used to model National
Occupations Standard (NOS) Level 3 and 4 buildings, DesignBuilder DSM can be used to model
Level 3, 4 and 5 buildings. The DesignBuilder interfaces facilitate quick and accurate data entry
contributing to significant productivity gains for Energy Assessors and modellers producing
Energy Performance Certificates (EPCs) and undertaking building regulations compliance work
in accordance with the UK National Calculation Methodologies (NCM). The language used in
this manual is based on English regulations, and as such the terms EPC and Part L/BRUKL are
also used to represent the certificates and building regulations documents generated for
compliance in Wales and Scotland.
48 Licenses were purchased and installed in 3 campuses.